ASEPCO Radial-Diaphragm™ Process Valves
 |
||
The ASEPCO 90° Process Valve is used in process lines at the point where the flow path changes 90°. These flow changes are commonly found in the WFI system loops and the food, dairy, and beverage industries. The cylinder of the ASEPCO valve chamber is easy to SIP/CIP and the right angle flow path naturally turns a horizontal flow path to a vertical flow path.
Features & Benefits |
|
|
|
Put a behind-the-seat flowpath in your lines! See the ASEPCO Switch schematic for an example.
ASEPCO Process Valve Specifications |
||
| Material options | 316L, AL6XN, Hastelloy, Alloy C-22 and C276, Polypropylene | |
| Method of Manufacturing | Machined from solid, hot-rolled, bar stock | |
| Sizes | .5 inch, .75 inch, 1 inch, 1.5 inch, 2 inch, 2.5 inch, 3 inch | |
| Finishes | 20-25 Microinch RA (180 grit) 15-19 Microinch RA (240 grit) 9-11 Microinch RA (320 grit) |
|
| Maximum Pressure | 250 psi | |
| Maximum Temperature | 135ºC/275ºF | |
| Outlet End Connections | Sanitary flange and buttweld | |
| Optional Port Connections | Per customer specification | |
| Packaging | All valves are separately packed in foam packing | |
| Marking | Each valve is marked for full material traceability | |
| ISO | All product and procedures are governed by our ISO Quality Assurance Program | |
| Non-Standard Custom Products | Please contact our Customer Service Department for any non-standard valve requirement | |